Digi XBee3 802.15.4 User Manual

Get started Perform a range test
Digi XBee3® 802.15.4 RF Module User Guide
22
8. Move Radio 1 around to see the resulting signal strength at different distances. You can also
test different data rates by reconfiguring the BR (data rate) parameter on both radios. When
the test is complete, click Stop Range Test. XCTUdisplays another loopback jumper warning
screen reminding you to put the loopback jumper back in its original position.

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English