Digi XBee3® 802.15.4 RF Module User Guide
6
Analog and PWM I/O Lines 56
Networking
Networking terms 58
MAC Mode configuration 58
Clear Channel Assessment (CCA) 59
CCA operations 59
Retries configuration 59
Transmit status based on MAC mode and XBee retries configurations 60
Addressing 61
Send packets to a specific device in Transparent APImode 61
Addressing modes 61
Peer-to-peer networks 62
Master/slave networks 62
End device association 62
Coordinator association 63
Association indicators 64
Modem status messages 64
Association indicator status codes 65
Direct and indirect transmission 65
Configure an indirect messaging coordinator 66
Send indirect messages 66
Receive indirect messages 66
Encryption 67
Maximum payload 68
Maximum payload rules 68
Maximum payload summary tables 69
Working with Legacy devices 69
Network commissioning and diagnostics
Remote configuration commands 72
Send a remote command 72
Apply changes on remote devices 72
Remote command responses 72
Node discovery 72
About node discovery 73
Node discovery in compatibility mode 73
Directed node discovery 73
Directed node discovery in compatibility mode 73
Destination Node 74
Sleep support
Sleep modes 76
Pin Sleep mode (SM = 1) 76
Cyclic Sleep mode (SM = 4) 76
Cyclic Sleep with Pin Wake-up mode (SM = 5) 77
Sleep parameters 77
Sleep current 77
Sleep pins 77
Sleep conditions 78
To Next Page
Loading...
Need help?
General
