DigiPoS PowerPoS & Millennium Technical Manual
Under Counter Mounting
The DigiPoS can be mounted under the counter or on a secure vertical surface to
maximise the available space at the Point of Sale. In order to do this, a special bracket
must be used that has been specifically engineered for the DigiPoS. This bracket does not
obstruct the ventilation yet still provides a secure mounting without the need for drilling
holes in the case which will void the warranty.
DigiPoS Brackets
To fit the bracket, simply remove the case screw towards the rear of the DigiPoS and offer
up the bracket to the DigiPoS. Then, refit the screw and the DigiPoS can now be secured
in position.
The External PSU has mounting holes pre-formed in its case and does not require any
special brackets.
Please contact you’re nearest PC-PoS Office for further details and availability on these
brackets.
Page 11 of 11
To Next Page
Loading...
Need help?
General
