DigiPoS PowerPoS & Millennium Technical Manual
Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
f Power Management [Press Enter]
PM Control by APM [No]
Video Off Option [Always On]
Video Off Method [V/H SYNC+Blank]
Soft-Off by PWRBTN [Instant-Off]
f Wake Up Events [Press Enter]
Menu Level f
ÇÈÆÅ: Move +/-/PU/PD: Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6: Fail-Safe Defaults F7 : Optimised Defaults
Details
Feature Options Description
PM Control by APM
No
Yes
If Advanced Power Management (APM) is installed on
your system, selecting Yes gives better power savings.
Video Off Option
Always On
Suspend -> Off
All Modes-> Off
Defines what state your monitor will go into when in
power saving mode.
Blank Screen This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Video Off Method
DPMS Support
Select this option if your monitor supports the Display
Power Management Signalling (DPMS) standard of the
Video Electronics Standards to select video power
management values.
Soft-Off by PWRBTN
Instant-Off
Delay 4 Sec
Reserved Function
Do Not Alter
Page 58 of 58
To Next Page
Loading...
Need help?
General
