DigiPos PowerPoS User Manual

DigiPoS PowerPoS & Millennium Technical Manual
Wake Up Events Sub Menu
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
Item Help
VGA [OFF]
LPT & COM [LPT/COM]
HDD & FDD [ON]
PCI Master [OFF]
Modem Ring Resume [Disabled]
RTC Alarm Resume [Disabled]
xDate (of Month) 0
xResume Time (hh:mm:ss) 0:0:0
Primary INTR [ON]
fIRQ’s Activity Monitoring [Press Enter]
Menu Level ff
ÇÈÆÅ: Move +/-/PU/PD: Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6: Fail-Safe Defaults F7 : Optimised Defaults
Details
Feature Options Description
VGA
OFF
ON
Only valid if your monitor supports DPMS
LPT & COM
None
LPT
COM
LPT/COM
This setting allows you to bring the DigiPoS out of Doze
or suspend mode if there is activity on either the LPT
port, Com Ports or Both.
HDD & FDD
On
Off
This setting allows you to bring the DigiPoS out of Doze
or suspend mode if there is activity on either the HDD,
FDD or Both.
PCI Master
On
Off
This setting allows you to bring the DigiPoS out of Doze
or suspend mode if there is activity on the PCI Bus
from any devices such as the network.
Modem Ring Resume
Disabled
Enabled
Reserved Function
Do Not Alter
RTC Alarm Resume
Enabled
Disabled
This setting allows you to bring the DigiPoS out of Doze
or suspend mode at a specific time.
Primary INTR
ON
OFF
Selects the Primary Interrupt to either on or off.
IRQ’s Activity Monitoring
-
Allows you to manually set which IRQ’s when activated
can bring the DigiPoS out of Doze or Suspend Mode.
Page 60 of 60

DigiPos PowerPoS Specifications

General

Brand	DigiPos
Model	PowerPoS
Category	Touch terminals
Language	English