DigiPoS PowerPoS & Millennium Technical Manual
USER’S NOTICE
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of PC-PoS.
PC-PoS provides this manual “AS IS” without warranty of any kind, either express or
implied, including but not limited to the implied warranties or conditions of merchantability
or fitness for a particular purpose. In no event shall PC-PoS, its directors, officers,
employees or agents be liable for any indirect, special, incidental, or consequential
damages (including damages for loss of profits, loss of business, loss of use or data,
interruption of business and the like), even if PC-PoS has been advised of the possibility
of such damages arising from any defect or error in this manual or product.
Specifications and information contained in this manual are provided for informational use
only, and are subject to change or update at any time without notice, and should not be
construed as a commitment by PC-PoS. PC-PoS assumes no responsibility or liability for
any errors or inaccuracies that may appear in this manual, including the products and
software described in it.
Updates to this manual and additional information may be found on the Internet at
http://www.pc-pos.com/
For any drivers associated with this DigiPoS, please contact your supplier/distributor or
you can find the latest versions available for download on the Internet at
http://www.pc-pos.com
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital
device. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at
this own expense.
Notice
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
All brand names and registered trademarks mentioned in this manual are the property of
their respective owners and their use here is for reference purposes only.
Page 2 of 2
To Next Page
Loading...
Need help?
General
