DG-
FS1526 User Manual
10
4.1.3 Choo
sing the Installation Location
T
he DG-FS1526 can be installed in either of the following ways as required:
On the work platform
On a rack
4.1.3.1 Installing the
DG-FS1526 on the Work Platform
T
he common way is to install the DG-FS1526 on a clean work platform. Pay attention to
the following precautions:
Ensure that the work platform is flat and stable.
Ensure good ventilation of air ports on both sides of the device.
Do not put heavy objects on the device.
4.1.3.2 Installing the
DG-FS1526 on a Rack
Befor
e installing the DG-FS1526 on a rack, you need to install the provided L- Clamps on
both sides of the DG-FS1526.
To Next Page
Loading...
Need help?
General
