DG-FS1526 User Manual
These parameters are displayed:
Field Description
Loopback Detection Function Enables/Disables (Default: disable)
Auto Wake Up Configures the interface for automatic loopback
release.
Wake-Up Time interval Defines the time interval for the port that will be
released from the discarding state.
Interface status displays a list of ports with loopback detection status. Select “Reset All Ports”
option for manual release.
7.10 Trunking
This section describes how to configure static and dynamic trunks.
You can create multiple links between devices that work as one virtual aggregate link. A port
trunk offers a dramatic increase in bandwidth for network segments where bottlenecks exist,
as well as providing a fault tolerant link between two devices.
The switch supports both static trunking and dynamic Link Aggregation Control Protocol
(LACP). Static trunks have to be manually configured at both ends of the link. On the other
hand, LACP configured ports can automatically negotiate a trunked link with LACP-
configured ports on another device.
Choose Trunking, and the Link Aggregation Settings sub-menu is shown as below.
51
To Next Page
Loading...
Need help?
General
