Digisol DG-FS1526 User Manual

DG-FS1526 User Manual
60
8 Troubleshooting
If a fault occurs, refer to the following table for troubleshooting:
Symptom Suggested Solution
The Power indicator is not
ON after the system is
started
 Check whether the power is correctly connected.
 Check whether the power switch is turned on.
The Power indicator is
ON but the Ethernet
indicator is off
 Check whether the network cable is correctly
connected.
 Check whether the configuration is correct.

Digisol DG-FS1526 Specifications

General

Brand	Digisol
Model	DG-FS1526
Category	Switch
Language	English