DG-
FS1526 User Manual
6
1 Precautions
Power supply sockets with too heavy load or broken cables and plugs may
cause electric shock or fire. Users should check the power supply wires and
cables regularly. If there is any breakage, please replace the cable at once.
Do not open the case of the device, especially during device power-on.
The device should be installed at position with good ventilation and without
high temperature or direct sunshine, so as to avoid faults of the device and its
corresponding components due to overheat.
Do not put this device close to a damp or watery place. Do not spill any fluid on
this device.
Keep proper space for heat dissipation, to avoid any damage to the device
caused by overheating. The holes on the shell are designed for heat dissipation,
to ensure that the device works normally. Do not cover the heat dissipation
holes.
Keep the power plug clean and dry, if abnormal phenomenon occurs, such as
smoke, abnormal sound, abnormal smell, switch off the power.
To Next Page
Loading...
Need help?
General
