Digisol DG-FS1526 - Class of Service Configuration - 1

DG-FS1526 User Manual
7.7.2 Class of Service Configuration - 1
Choose QoS Setting > Port, 802.1p, IP/DS based, and the following page appears.
The COS of port supports the following mode.
 Based on port
 Based on 802.1p: The priority is determined according to the value of
802.1p (bit [15:13]) in the VLAN Tag. Packets in which values of
802.1p (bit [15:13]) are 000-011 map to lower priority. Packets in which
values of 802.1p (bit [15:13]) are 100-111 map to higher priority.
38
 Based on IP
/ DS: