Digisol DG-FS1526 - Hardware Description

DG-
FS1526 User Manual
4.2 Hardw
are Description
4.2.1 Front Pan
el
The following tabl
e describes the interface of the DG-FS1526.
Interfa
ce/Button
Descrip
tion
1~24 24 x RJ-45 Ethernet interfaces, 10
M/100 M self-adaptive.
25,
26
Two groups of fiber-copper combo ports. The copper ports are 10
M/100 M/1000 M self-adaptive Ethernet ports and the fiber ports
are SFP optical module ports. If the combo ports are preferred to
serve as fiber ports, that is, if the ports connect to a fiber port, the
copper port is disabled.
Reset
Keep the device p
owered on and push a paper clip into the hole.
Press down the button for about 5 seconds. The system restores the
factory default settings.
The follo
wing table describes the twenty-seven LED indicators of the DG-FS1526.
LED
Indica
tor
Color St
atus
Descrip
tion
Of
f The power is off.
Power Green
On T
he power is on.
Of
f The LAN interface is not connected.
Blinks Data is being trans
mitted.
1 ~ 24,
25, 26
Link/Act
Green
On The network connection is established.
11