DG-SC2100/DG-SC2100W User Manual
33
2.2.4 UPnP
When UPnP function is activated, all UPnP-compatible computers / network devices
will be able to discover this IP camera automatically (only those in the same local
network).
This function is useful and you don’t have to remember the IP address of this IP
camera. Simply open ‘My Network Places’ and the icons for the IP Cameras can be
seen.
The settings in this menu are described below:
Item Description
Enable UPnP Select ‘Enable’ to activate UPnP function of this IP camera, select
‘Disable’ to disable it.
Click ‘Apply’ to save settings and make the new settings take effect.
Once UPnP function is activated, a popup message as shown below will appear:
Click the message to open ‘My Network Places’, and you’ll see the IP camera:
To Next Page
Loading...
