DG-SC2100/DG-SC2100W User Manual
56
2.8.1 Camera Information
Camera information allows you to set the name and administrator’s password of this
camera.
The settings in this menu are described below:
Item Description
Camera Name The name of this IP Camera can be specified here. This
can be used to identify the camera on the network when
you have more than one IP camera in the same network.
Default name begins with ‘SC-‘followed by the last 6
characters of the MAC address of this IP camera.
Password Please specify user name admin’s password here. (The one
you need when you log onto web management interface
and use ‘admin’ as user name.
Confirm Password Please input the same password again, to ensure that there
is no typographical error.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
