Digisol DG-SC2100 - Configuring SKYROS Manager Software; Configuring Cameras in Software

DG-SC2100/DG-SC2100W User Manual
70
3.3 Configuring the SKYROS Surveillance Manager software
3.3.1 Configuring cameras
Before you use the SKYROS Surveillance Manager software, you must configure the
camera(s) you wish to connect. Please click ‘Setup’ button and the below
popup menu will appear:
Please select ‘Configure Cameras’ to configure cameras:
Note: If you’re prompted by a windows security alert which asks you if
you want to block ‘IPCamViewer’ program, please click ‘Unblock’
button, else the SKYROS Surveillance Manager software will not be
able to function correctly.