DG-SC2100/DG-SC2100W User Manual
76
3.3.1.4 Motion Recording
When this function is activated, only motions captured by the camera will be
recorded, so hard disk storage space is not wasted on images that do not need
attention.
The settings are described below:
Item Description
Channel Select the channel number you wish to set.
Enable Enable motion record function.
Disable Disable motion record function.
Recording Time Select the time duration that camera will record when a motion
has been detected from dropdown menu in seconds.
Invoke alarm when
motion is triggered
Send an alarm when a motion has been detected by the
camera.
Send mail when
motion is triggered
Send an email to a pre-defined address when a motion has
been detected by the camera.
WARNING: For applications that require high security, it is not
recommended to use this function since certain minor
changes/movements may not trigger the camera to record. This may
not be desirable.
To Next Page
Loading...
