DG-SC2100/DG-SC2100W User Manual
50
Following screenshot shows the Motion Detection Settings:
The settings in this menu are described below:
Item Description
Motion Detection
Enable
Select ‘Enable’ to start motion detection, and select ‘Disable’ to
disable it.
Next Event
Detected Interval
After a motion is detected and intimations are sent via email/ftp,
no more intimation will be sent for the period mentioned here.
This is the minimum duration between any two intimations of
Motion Detection.
Please specify a time interval that suites your need. If the time
interval is too long, you may not be able to know what has
happened between time interval; if the time interval is too short,
you may receive too many unnecessary images, and consumes
too much disk storage space on Email and / or FTP server.
Send snapshot file
to Email
Select ‘Yes’ to send a picture to the Email address you specified
in ‘E-Mail & FTP’ menu when a motion is detected, and select
‘No’ to disable this function.
E-Mail Subject Set the subject of Email being sent here. This will help you to
distinguish the Email sent by this IP camera from others.
Send snapshot file
to FTP
Select ‘Yes’ to send a picture to the FTP server you specified in
‘E-Mail & FTP’ menu when a motion is detected, and select ‘No’
to disable this function.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
