DG-SC2100/DG-SC2100W User Manual
52
The settings in the motion detection menu are described below:
Item Description
Region1 / Region2
/ Region3
Check the box to enable / disable a certain motion detection
area.
Sensitivity Control the detection sensitivity of motion detection of
respective motion detection regions. When sensitivity is
higher, small changes in image will cause IP camera to send an
Email / FTP notification; if you received too much unwanted
notification, try to set sensitivity to a lower value.
Refresh Click this button to take and display a new picture so you can
make real-time adjustments to motion detection region.
Save Save current motion detection settings.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
