Digital Check TellerScan TS240 User Manual

TellerScan
®
TS240 User Manual
Rev 122013
Page | 16
Loading Items into the Scanner
The TS240’s automatic feeder can handle up to 100 items at a time. Please follow the steps below to ensure
proper feeding.
Step 1: Slide out the ‘Exit Tray’ to expand the length of the tray to accommodate larger or business size
checks. Remove all rubber bands, staples, paper clips, etc. Straighten any bent corners or excessively
wrinkled documents.
Step 2: Align / jog the items to prepare them for scanning.
Step 3: The leading and bottom edges of items should be aligned. Place the item(s) by sliding them into the
‘Entry Tray’ with the front of the item facing out and away from the scanner.
Step 4: Aligned items must be inserted flat into the ‘Entry Tray’ and slid forward until they stop or are pulled
into the scanner.

Digital Check TellerScan TS240 Specifications

General

Model	TellerScan TS240
Category	Scanner
Interface	USB 2.0
Operating System Compatibility	Windows 7, 8, 10
Power Supply	100-240 VAC, 50/60 Hz
Speed	Up to 100 documents per minute
Resolution	300 dpi
Feeder Capacity	100 documents
Image Type	Grayscale
MICR Read Rate	99%