TellerScan
®
TS240 User Manual
Rev 122013
Page | 17
Accessing the TellerScan TS240
Accessing the Internal Document Path
The TellerScan TS240 has two covers, the ‘Center’ cover and ‘Outer’ cover. These can be removed separately
or together by lifting / pulling up on the covers.
Accessing the Cameras
Note: Older models might have a white nylon thumbscrew in place of the latch shown below.
Step 1: With the ‘Center’ and ‘Outer; covers removed, locate the blue ‘Camera Door Latch’ and the tab part of
the latch to unlock the camera door assembly.