Digital Dream DDCS V3.1 - Page 30

Digital Dream Standalone Motion Controller DDCS V3.1 DDCS V3.1 Users Manual
Page -29
Figure 3-9 Paste the 2mmnew.tap file to this directory
Hrere the 2mmnew.tap file is selected. Press the key to copy the 2mmnew.tap file
1）Copy the file
Figure 3-7 Select 2mmnew.tap file and copy the file
Figure 3-8 Find the target file where you want to copy to
2）Paste the file
Tab
Choose your target directory or target folder, click to paste the 2mmnew.tap file
to this directory. See Figure 3-9 for reference
Shift