Digital Dream DDCS V3.1 - Page 31

Digital Dream Standalone Motion Controller DDCS V3.1 DDCS V3.1 Users Manual
Page -30
Figure 3-10 Move the blue strip to the 2mmnew.tap file, click MODE to delete
Figure 3-11 Delete the 2mmnew.tap file
Figure 3-12 Search for the file2mmnew.tap and load
Highlight the required file and click to delete the file
3) Delete a file
Mode
4) Load the G code file
Highlight the G code file required and click . The file will be loaded and the screen
will change back to the Main Screen for processing. The file name will be displayed.
HOME
Z
-
ENTER