Digital Dream Standalone Motion Controller DDCS V3.1 DDCS V3.1 Users Manual Page -73
When the Users wants to save the newly defined parameters, or wants to copy the same
settings to another DDCS V3.1 controller, this how to do it:
For more information on file management refer to section 3.3.1
Power on the controller, wait for it to boot up, insert the USB memory stick.
Press the Page button and go to the File Page.
Locate the folder named “mnt”, [this is the system folder]. In this folder, there is a folder
named “nand1-1” , this folder contains all the system files. In here there is a file named “setting”,
select if and press copy it using the TAB key
Figure 4-1 Enter into System folder “MNT”
Figure 4-2 Setting file is in “nand1-1” from “MNT”folder
4.2 Save the Parameters Setting
To Next Page
Loading...
