Digital Dream Standalone Motion Controller DDCS V3.1 DDCS V3.1 Users Manual Page -74
In the System, the USB memory stick’s name is “udisk-sda1”
Open this folder and paste the file by pressing the Shift key
Now the controller setting parameter file is saved on the USB stick.
Figure 4-3 find the setting file and copy
If the user’s need to copy the same Parameters Setting in other DDCS controllers,just copy
this “setting” file into the system folder,replace the initial setting file.
Figure 4-4 find the USB-Stick and enter into it
Figure 4-5 Copy the setting to USB-Stick
To Next Page
Loading...
