Digitize Inc. System Programming
700271-0001 Rev. G 05/13 27
Default Setting: Low Battery Box Number: 125
5.5.2 Setting 2 Low Battery Code
When the DET-16 panel detects a Low Battery condition, it will transmit a Low Battery Box
Number followed by the Low Battery Code. The Low Battery Code can be set from 0 – 9.
Default Setting: Low Battery Code: 1
5.5.3 Setting 3 Low Battery Rounds
This function sets the number of times a Low Battery Box Number & Code will be sent
when a Low Battery condition is detected. The number of rounds can be set from 0 to 4. If
the rounds is set equal to 0, no transmission will occur.
Default Setting: Low Battery Rounds: 0 Rounds.
5.5.4 Setting 4 Low Battery Restore Code
The DET-16 sends a Low Battery Restore Transmission when the panel goes from a Low
Battery condition to a Normal Operating or “Charged Battery” condition. The Low battery
Restore Code can be set from 0 – 9. When the Battery returns to a normal condition, the
DET-16 will first transmit the box number followed by the Low Battery Restore Code.
Default Setting: Low Battery Restore Code: 1
To Next Page
Loading...