DIGITIZE DET-16 - Operation; The File Menu; The Transfer Menu

To Next Page

To Previous Page

Det-16 Programming Utility Digitize Inc

36 700271-0001 Rev. G 05/13

6.3 Operation

The Det-16 Programming Utility allows perform the following tasks on a Det-16 panel:

• Upload firmware to the Det-16

• Download the firmware currently installed on the Det-16.

• Download the settings from the Det-16 panel.

• Edit the settings for the Det-16 panel.

• Save the settings to disk.

• Load settings from disk.

• Upload settings into the Det-16.

6.3.1 The File Menu

The File Menu pull down tab allows you to Open and Save Det-16 configurations. Selecting

“New” configuration loads all of the default settings for a Det-16 into the programmer

software.

6.3.2 The Transfer Menu

The Transfer Menu contains all the routines for uploading and downloading the firmware

and the configurations for the Det-16.