UC2000-VE/F/G GSM/CDMA/WCDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Co., Ltd.
100
Getting start to PCM capture
PCM capture is help to analysis voice stream between GSM/CDMA modular and DSP
chipset.
To enable PCM capture
Select ‘PCM only’ on Network Capture page
Click “Start’ to enable PCM capture
Dialing out through gateway, start talking a short while then hangup the call.
Click ‘Stop’ to disable network capture
Save the capture file to local computer
The capture is named to ‘capture(x).pcap’, x is serial number of capture and will be added
1 in next time. The sample of PCM capture as below:
Getting start to Syslog capture
Syslog capture is another way to obtain syslog which the same as remote syslog server
and filelog. The capture file is save as pcap format so that it can be opened in some of
capture software like Wireshark, Ethereal software etc.
To Next Page
Loading...
