ICS-1000 Ion Chromatography System
3-2 Doc. 031879-01 3/03
Sample Processing Overview
Samples can be run either manually (one at a time), or they can be grouped and
run automatically in batches. Figure 3-2
shows the typical steps for manual and
batch sample processing. Samples can be loaded into the sample loop with an
autosampler or with a syringe through the injection port on the ICS-1000 front
door.
Figure 3-2. Sample Processing Overview
Manual Sample
Processing
Using Chromeleon
Inject the sample
Autozero
Stop data
acquisition
(Optional)
Save the manual
sequence data
Start data
acquisition
Batch Sample
Processing
Using Chromeleon
Create a Sequence
(Sequence Wizard)
Start the Batch
Add the Sequence
to the Batch
Load the sample
To Next Page
Loading...
