Connections and Setup
71
Connecting to a TV
1
2
3
4
5
6
7
8
9
10
11
R
1
2
3
4
5
6
7
8
9
10
R
YP
B
PR
Connections
The YPbPr connections provide high-quality audio and video to you
r HDTV or HD monitor.
1
Connect between the YPbPr component connec
tions on the receiver and the HDTV using
component video cables.
2
Connect audio (red and white) RCA-type cables between the receive
r Audio Outputs and
audio input connections that go with the YPbP
r connectors on your HDTV or monitor.
3
If you do not see a picture, change t
he resolution setting on the receiver.
4
Turn up the volume on your HDTV and confirm you have sound. Che
ck the RCA-type
connections if you don’t have sound.
No Picture on the HDTV
This section will help you make
a picture on the HDTV in the
event that you could not do
so in the previous sections.
1
Connect RCA-type cable connections between the receiver Out and the
HDTV.
2
Make sure the receiver and HDTV are on.
3
Make sure the HDTV is set to display satellit
e TV. Look on the ba
ck of your HDTV and
consult your HDTV user’s guide.
4
On the receiver front panel, press SYS INFO.
5
Change the HDTV settings as described on page 72.
6
Switch to the HDTV to displa
y satellite TV. If you have a picture, you are finished.
7
Repeat steps 5 and 6 until the HDTV displays video from the receive
r.
To Next Page
