Index
DESCRIPTION 4
DIRECTIVES 4
TECHNICAL DETAILS 5
1. ENCLOSURE INSTALLATION 8
2. ELECTRICAL OPERATING INSTRUCTIONS 8
2.1 CONTROL UNIT POWER SUPPLY 8
2.2 MOTOR POWER SUPPLY 9
3. PUSH BUTTONS 9
3.1 ADDITIONAL CONTROL BUTTONS 9
4. CONTROL UNIT SET-UP 10
4.1 SET-UP MODE ACTIVATION 10
4.2 BASIC PROGRAMMING 10
4.3 RESET PROCEDURE 11
5 OPERATION WITH ENCODER MOTOR 12
5.1 CONNECTING ENCODER LIMIT SWITCHES 12
5.2 CONFIGURATION OF ENCODER LIMIT SWITCH 13
5.3 ENCODER LIMIT SWITCH ADJUSTMENT 14
5.4 FINE-TUNING OF ENCODER LIMIT SWITCH 15
6.
OPERATION WITH MOTOR WITH MECHANICAL LIMIT SWITCHES 16
6.1 CONNECTING MECHANICAL LIMIT SWITCHES 16
6.2 CONFIGURATION FOR MECHANICAL LIMIT SWITCH 17
7. OPERATION MODE 17
8. WORKING TIME SET-UP 18
9. AUTOMATIC CLOSING 18
10. “CAR WASH” FUNCTION 19
11. TEMPORARY DISABLING OF AUTOMATIC CLOSING 19
12. PARTIAL OPENING WITH ENCODER LIMIT SWITCHES 20
12.1 AUTOMATIC CLOSING FROM PARTIAL OPENING 20
13. SAFETY DEVICES 21
13.1 PHOTOCELLS 21
13.2 SAFETY EDGE 22
13.3 SECONDARY MOVABLE SAFETY EDGE 23
13.4 AUX RELÈ MANGEMENT (max 230Vac/5A) 23
14. PARAMETER LIST 24
15. FLASHING LIGHT CONNECTION (230Vac with self-flashing) / COURTESY LIGHT 27
15.1 FLASHING LIGHT 27
15.2 COURTESY LIGHT 27
15.3 ADDITIONAL RADIO RECEIVER MODULE NRGZENX1 (OPTIONAL) 28
15.4 “GO FUNCTION” 28
16 SIGNAL VISUALIZED ON THE DISPLAY 29
17. TROUBLESHOOTING 30
17.1 ERROR CODES - D15 ERROR LED 30
17.2 DISPLAY ERROR CODE 31
To Next Page
Loading...
