dji AIR 3S - Preparing the Remote Controller; Dji Rc 2

• It is recommended to use the DJI charger to charge the Intelligent Flight Battery.
Visit the ocial DJI website for details.
• Make sure the gimbal protector is removed and all arms are unfolded before
powering on the aircraft. Otherwise, it may aect the aircraft self-diagnostics.
• It is recommended to attach the gimbal protector when the aircraft is not in use.
• Make sure to place the propellers of the front arms into the two dents on both
sides of the aircraft back. DO NOT push the propeller blades onto the back of
the aircraft, which may cause the propeller blades to deform.
Preparing the Remote Controller
DJI RC 2
1. Remove the control sticks from the storage slots and mount them on the remote
controller.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 11