dji AIR 3S - Dji Rc-N3; Operations; Powering On;Off; Charging the Battery

6.2 DJI RC-N3
Operations
Powering On/O
Press the power button once to check the current battery level.
Press, then press and hold to power the remote controller on or o.
Charging the Battery
Connect the charger to the USB-C port on the remote controller.
• Fully charge the remote controller before each ight. The remote controller
sounds an alert when the battery level is low.
• Fully charge the battery at least once every three months to maintain the
battery’s health.
Controlling the Gimbal and Camera
1
2
3
4
1. Gimbal Dial: Control the tilt of the gimbal.
DJI Air 3S User Manual
74 © 2024 DJI All Rights Reserved.