Customizable Buttons
C1 and C2 are customizable buttons. Press the C1 button once to recenter the gimbal
or point the gimbal downward by default. Press the C2 button once to switch between
Landscape and Portrait mode by default. To set the function, go to camera view in DJI Fly,
and tap > Control > Button Customization.
Remote Controller LEDs
1. Status LED
2. Battery Level LEDs
Status LED
Blinking Pattern Descriptions
Solid red Disconnected from the aircraft.
Blinking red The battery level of the aircraft is low.
Solid green Connected with the aircraft.
Blinking blue The remote controller is linking to an aircraft.
Solid yellow Firmware update failed.
Solid blue Firmware update successful.
Blinking yellow The battery level of the remote controller is low.
DJI Air 3S User Manual
70 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
