dji AIR 3S - Using the Charging Hub

Blinking Pattern Battery Level
0-50%
51-75%
76-99%
100%
• The blinking frequency of the battery level LEDs diers depending on the USB
charger used. If the charging speed is fast, the battery level LEDs will blink
quickly.
• Four LEDs blinking simultaneously indicates the battery is damaged.
Using the Charging Hub
The battery charging hub is designed to charge up to three Intelligent Flight Batteries.
After the Intelligent Flight Batteries are installed, the charging hub can supply power to
external devices via the USB-C port, such as remote controllers or mobile phones. The
charging hub can also use the power accumulation function to transfer the remaining
power of multiple lowpower batteries into the battery with the highest remaining power.
• The environmental temperature aects the charging speed. Charging is faster in
a well-ventilated environment at 25° C (77° F).
• The charging hub is only compatible with specic model of the Intelligent Flight
Battery. DO NOT use the charging hub with other battery models.
• Place the charging hub on a at and stable surface when in use. Make sure the
device is properly insulated to prevent re hazards.
• DO NOT touch the metal terminals on the battery ports.
• Clean the metal terminals with a clean, dry cloth if there is any noticeable
buildup.
1
2
3
4
5
1. USB-C Connector
2. Status LED
3. Function Button
4. Battery Release Button
5. Battery Port
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 59