dji AIR 3S - Aftersales Information

◆
FCC Certied personal wireless device that uses GPS with SBAS (WAAS) for location
services; or
◆
FCC Certied personal wireless device with integrated GNSS.
Also, the external device must be operated in a way that does not interfere with the
location reported and its correlation to the operator location.
• The aircraft automatically initiates a pre-ight self-test (PFST) of the Remote ID system
before takeo and cannot take o if it does not pass the PFST.
[2]
The results of the
PFST of the Remote ID system can be viewed in either a DJI ight control app such as
DJI Fly or DJI goggles.
• The aircraft monitors the Remote ID system functionality from pre-ight to shut down.
If the Remote ID system malfunctions or has a failure, an alarm will be displayed in
either a DJI ight control app such as DJI Fly or DJI goggles.
• The aircraft using the Intelligent Flight Battery does not activate Remote ID system.
• You can visit the ocial website of FAA to learn more about aircraft registration and
Remote ID requirements.
Footnotes
[1] DJI mobile devices without an integrated GNSS system such as DJI RC-N3, and DJI Goggles 2.
[2] The pass criterion for PFST is that the hardware and software of the Remote ID required-data
source and radio transmitter in the Remote ID system are functioning properly.
7.13 Aftersales Information
Visit https://www.dji.com/support to learn more about aftersales service policies, repair
services, and support.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 93