dji AIR 3S - Cruise Control; Using Cruise Control

4.6 Cruise Control
It is recommended to click the link below or scan the QR code to watch the tutorial video.
https://www.dji.com/air-3s/video
Cruise Control enables the aircraft to y at a constant speed automatically, which makes
long distance ights eortless, and helps to avoid image shaking which often happens
during manual operation. More camera movements, such as spiraling up, can be achieved
by increasing control stick input.
• Cruise control is available when you are manually operating the aircraft in
Normal, Cine, and Sport mode. Cruise control is also available when using APAS,
Free Hyperlapse, and Spotlight.
• Cruise control cannot be started without a control stick input.
• The aircraft cannot enter or will exit cruise control in the following situations:
◆
When near the max altitude or max distance.
◆
When the aircraft disconnects from the remote controller or DJI Fly.
◆
When the aircraft senses an obstacle and thus brakes and hovers in place.
◆
When the aircraft is taking o, returning to home, or landing.
◆
When switching ight modes.
• The obstacle sensing in cruise control follows the current ight mode. Fly with
caution.
Using Cruise Control
1. Set one customizable button of the remote controller to Cruise Control.
2. When pushing the control sticks, press the cruise control button, and the aircraft will
automatically y at the current speed.
3. Press Flight Pause button on the remote controller once, or tap to exit cruise
control.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 37