Blinking Pattern Battery Level
51-62%
38-50%
26-37%
13-25%
0-12%
Powering On/O
Press, then press and hold the power button to power the aircraft on or o. The battery
level LEDs display the battery level when the aircraft is powered on. The battery level LEDs
turn o when the aircraft is powered o.
If the two LEDs shown in below picture blink simultaneously, it indicates the battery is
malfunctioning. Remove the battery from the aircraft, insert the battery again and make
sure that it is securely mounted.
Charging the Battery
Fully charge the battery before each use. It is recommended to use the charging devices
provided by DJI or other chargers that support the USB PD fast charging protocol.
Using a Charger
• The battery cannot be charged if the aircraft is powered on.
The table below shows the battery level during charging.
DJI Air 3S User Manual
58 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
