• If a USB connection prompt appears when an Android mobile device is used,
select the option to charge only. Other options may cause the connection to fail.
• Adjust the mobile device holder to make sure your mobile device is rmly
secure.
Activation
The aircraft requires activation before rst use. Press, then press and hold the power
button to power on the aircraft and remote controller respectively, and then follow the
onscreen prompts to activate the aircraft using DJI Fly. An internet connection is required
for activation.
Binding the Aircraft and Remote Controller
After activation, the aircraft is bound to the remote controller automatically. If automatic
binding fails, follow the on-screen prompts on DJI Fly to bind the aircraft and remote
controller for an optimal warranty service experience.
Firmware Update
A prompt will appear in DJI Fly when a rmware update is available. Update the rmware
whenever prompted to ensure the optimal user experience.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 13
To Next Page
Loading...
