dji AIR 3S - Unlocking GEO Zones; Flight Environment Requirements

Zones. You can view such information in real-time in DJI Fly. GEO Zones are specic
ight areas, including but not limited to airports, large event venues, locations where
public emergencies have occurred (such as forest res), nuclear power plants, prisons,
government properties, and military facilities. By default, the GEO system limits takeos
and ights in zones that may cause safety or security concerns. A GEO Zone map that
contains comprehensive information on GEO Zones around the globe is available on the
ocial DJI website: https://y-safe.dji.com/nfz/nfz-query.
Unlocking GEO Zones
To satisfy the needs of dierent users, DJI provides two unlocking modes: Self-Unlocking
and Custom Unlocking. You can make a request on the DJI Fly Safe website.
Self-Unlocking is intended for unlocking Authorization Zones. To complete Self-Unlocking,
you must submit an unlocking request via the DJI Fly Safe website at https://y-
safe.dji.com. Once the unlocking request is approved, you can synchronize the unlocking
license through the DJI Fly app. To unlock the zone, alternatively, you can launch or y the
aircraft directly into the approved Authorization Zone and follow the prompts in DJI Fly to
unlock the zone.
Custom Unlocking is tailored for users with special requirements. It designates user-
dened custom ight areas and provides ight permission documents specic to the
needs of dierent users. This unlocking option is available in all countries and regions and
can be requested via the DJI Fly Safe website at https://y-safe.dji.com.
• To ensure ight safety, the aircraft will not be able to y out of the unlocked
zone after entering it. If the Home Point is outside the unlocked zone, the
aircraft will not be able to return home.
2.2 Flight Environment Requirements
1. DO NOT y in severe weather conditions such as strong winds, snow, rain, and fog.
2. Only y in open areas. Tall buildings and large metal structures may aect the
accuracy of the onboard compass and GNSS system. After takeo, make sure you
are notied with the voice prompt that the Home Point is updated before continuing
ight. If the aircraft has taken o near buildings, the accuracy of the Home Point
cannot be guaranteed. In this case, pay close attention to the current position of
the aircraft during auto RTH. When the aircraft is close to the Home Point, it is
recommended to cancel auto RTH and manually control the aircraft to land at an
appropriate location.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 19