dji AIR 3S - Advanced Pilot Assistance Systems

◆
Flying near moving surfaces or objects.
◆
Flying in an area with frequent and drastic lighting changes.
◆
Flying near extremely dark (<1 lux) or bright (>40,000 lux) surfaces.
◆
Flying near surfaces that strongly reect or absorb infrared waves (e.g.,
mirrors).
◆
Flying near surfaces without clear patterns or textures.
◆
Flying near surfaces with repeating identical patterns or textures (e.g., tiles
with the same design).
◆
Flying near obstacles with small surface areas (e.g., tree branches, and
power lines).
• Keep the sensors clean at all times. DO NOT scratch or tamper with the sensors.
DO NOT use the aircraft in dusty or humid environments.
• The vision system cameras may need to be calibrated after being stored for
an extended period. A prompt will appear in DJI Fly and calibration will be
performed automatically.
• DO NOT y when it is rainy, smoggy, or the visibility is lower than 100m.
• DO NOT obstruct the sensing system.
• Check the following each time before takeo:
◆
Make sure there are no stickers or any other obstructions over the glass of
the sensing system.
◆
Use a soft cloth if there is any dirt, dust, or water on the glass of the sensing
system. DO NOT use any cleaning product that contains alcohol.
◆
Contact DJI Support if there is any damage to the lenses of the sensing
system.
• The aircraft can y at any time of the day or night. However, the vision system
becomes unavailable when ying the aircraft at night. Fly with caution.
• The Forward-Facing LiDAR cannot detect obstacles with a reectivity of less than
10% or reective objects such as glass.
5.5 Advanced Pilot Assistance Systems
The Advanced Pilot Assistance Systems (APAS) feature is available in Normal mode
and Cine mode. When APAS is enabled, the aircraft will continue to respond to your
commands and plan its path according to both control stick inputs and the ight
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 51