Camera Notice
• DO NOT expose the camera lens to an environment with laser beams, such as a
laser show, or point the camera at intense light sources for an extended period
of time, such as the sun on a clear day, in order to avoid damaging the sensor.
• Make sure the temperature and humidity are suitable for the camera during use
and storage.
• Use a lens cleanser to clean the lens to avoid damage or poor image quality.
• DO NOT block any ventilation holes on the camera, as the heat generated may
damage the device or cause injury.
• The cameras may not focus correctly in the following situations:
◆
Capturing photos and videos of dark objects far away.
◆
Capturing photos and videos of objects with repeating identical patterns and
textures or objects without clear patterns or textures.
◆
Capturing photos and videos of shiny or reective objects (such as street
lighting and glass).
◆
Capturing photos and videos of ashing objects.
◆
Capturing photos and videos of fast-moving objects.
◆
When the aircraft/gimbal is moving fast.
◆
Capturing photos and videos of objects with varying distances in the focus
range.
5.10 Storing and Exporting Photos and Videos
Storing
The aircraft supports the use of a microSD card to store your photos and videos. Refer to
the Specications for more information about recommended microSD cards.
Photos and videos can also be saved in the internal storage of the aircraft when no
microSD card is available.
Exporting
• Use QuickTransfer to export the footage to a mobile device.
DJI Air 3S User Manual
64 © 2024 DJI All Rights Reserved.