1. The pre-ight checklist is designed to help you y safely. Go through the full pre-ight
checklist before each ight.
2. Place the aircraft in an open, at area with the rear of the aircraft facing towards you.
3. Power on the remote controller and the aircraft.
4. Launch DJI Fly and enter the camera view.
5. Tap > Safety, and then set the Obstacle Avoidance Action to Bypass or Brake.
Make sure to set an appropriate Auto RTH Altitude and Max Altitude.
6. Wait for the aircraft self-diagnostics to complete. If DJI Fly does not show any irregular
warning, you can start the motors.
7. Push the throttle stick up slowly to take o.
8. To land, hover over a level surface and push the throttle stick down to descend.
9. After landing, push the throttle down and hold until the motors stop.
10. Power o the aircraft before the remote controller.
3.5 Video Suggestions and Tips
1. Select the desired gimbal operation mode in DJI Fly.
2. It is recommended to take photos or record videos when ying in Normal or Cine
mode.
3. DO NOT y in bad weather such as on rainy or windy days.
4. Choose the camera settings that best suit your needs.
5. Perform ight tests to establish ight routes and preview scenes.
6. Push the control sticks gently to ensure smooth and stable movement of the aircraft.
DJI Air 3S User Manual
26 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
