EasyManua.ls Logo

dji AIR 3S - Inserting;Removing the Battery

dji AIR 3S
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
It is recommended to warm up the battery to at least 10°C (50°F) before takeo
when ying in low-temperature environments. The ideal temperature to warm up
the battery is above 20°C (68°F).
The reduced battery capacity in low-temperature environments reduces the wind
speed resistance performance of the aircraft. Fly with caution.
Take extra caution when ying at a high elevation with a low temperature.
4. A fully charged battery will automatically discharge when it is idle for a period of time.
Note that it is normal for the battery to emit heat during the discharging process.
5. Fully charge the battery at least once every three months to maintain battery health. If
the battery is not used for an extended period, battery performance may be aected
or may even cause permanent battery damage. If a battery has not been charged or
discharged for three months or more, the battery will no longer be covered by the
warranty.
6. For safety purposes, keep the batteries at a low power level in transit. Before
transportation, it is recommended to discharge the batteries to 30% or lower.
Inserting/Removing the Battery
Insert the Intelligent Flight Battery into the battery compartment of the aircraft. Make
sure the battery is fully inserted with a clicking sound, which indicates the battery buckles
are securely fastened.
Press the battery buckle to remove the battery from the compartment.
DJI Air 3S User Manual
56 © 2024 DJI All Rights Reserved.

Table of Contents

Related product manuals