2. Unfold the antennas.
3. The remote controller needs to be activated before rst use and an internet
connection is required for activation. Press, then press and hold the power button to
power on the remote controller. Follow the on-screen prompts to activate the remote
controller.
DJI RC-N3
1. Remove the control sticks from the storage slots and mount them on the remote
controller.
2. Pull out the mobile device holder. Choose the appropriate remote controller cable
based on the port type of your mobile device (the cable with a USB-C connector is
connected by default). Place your mobile device in the holder, then connect the end
of the cable without the remote controller logo to your mobile device. Make sure your
mobile device is securely in place.
DJI Air 3S User Manual
12 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
