dji AIR 3S - GEO Zones

Strong GNSS Signal
Flight Restrictions Prompt in DJI Fly App
Max Altitude
Altitude of the aircraft cannot ex-
ceed the value set in DJI Fly.
Max ight altitude reached.
Max Distance
The straight-line distance from
the aircraft to the Home Point
cannot exceed the max ight dis-
tance set in DJI Fly.
Max ight distance reached.
Weak GNSS Signal
Flight Restrictions Prompt in DJI Fly App
Max Altitude
• Altitude is restricted to 30m
from the takeo point if light-
ing is sucient.
• Altitude is restricted to 3m
above the ground if lighting
is not sucient and the 3D in-
frared sensing system is func-
tioning.
• Altitude is restricted to 30m
from the takeo point if light-
ing is not sucient and the 3D
infrared sensing system is not
functioning.
Max ight altitude reached.
Max Distance No limit
• Each time the aircraft is powered on, the altitude limit will be automatically
removed as long as the GNSS signal becomes strong (GNSS signal strength ≥
2), and the limit will not take eect even if the GNSS signal becomes weak
afterwards.
• If the aircraft ies out of the set ight range due to inertia, you can still control
the aircraft but cannot y it any further away.
GEO Zones
The DJI GEO system designates safe ight locations, provides risk levels and safety
notices for individual ights, and oers information on restricted airspace. All restricted
ight areas are referred to as GEO Zones, which are further divided into Restricted
Zones, Authorization Zones, Warning Zones, Enhanced Warning Zones, and Altitude
DJI Air 3S User Manual
18 © 2024 DJI All Rights Reserved.