dji AIR 3S - Quicktransfer

• Connect the aircraft to a computer using a data cable, export the footage in the
internal storage of the aircraft or in the microSD card mounted on the aircraft. The
aircraft does not need to be powered on during the exporting process.
• Remove the microSD card from the aircraft and insert it into a card reader, and export
the footage in the microSD card through the card reader.
• Ensure that the SD card slot and the microSD card are clean and free of foreign
objects during use.
• DO NOT remove the microSD card from the aircraft when taking photos or
videos. Otherwise, the microSD card may be damaged.
• Check camera settings before use to ensure they are congured correctly.
• Before capturing important photos or videos, take a few images to test whether
the camera is operating correctly.
• Make sure to power o the aircraft correctly. Otherwise, the camera parameters
will not be saved, and any recorded images or videos may be aected. DJI is not
responsible for any loss caused by an image or video recorded in a way that is
not machine-readable.
5.11 QuickTransfer
Follow the steps below to quickly download photos and videos from the aircraft to your
mobile device.
1. Power on the aircraft and wait until the self-diagnostic tests of the aircraft are
complete.
If the Allow QuickTransfer in Sleep feature is enabled in DJI Fly (enabled by default),
the QuickTransfer can be used while the aircraft is powered o.
2. Turn on the Bluetooth and Wi-Fi on the mobile device, and make sure the positioning
function is enabled as well.
3. Enter QuickTransfer mode using one of the methods below.
• Launch DJI Fly and tap the QuickTransfer card on the home screen.
• Launch DJI Fly, go to Album, and tap in the upper right corner.
4. Once successfully connected, the les on the aircraft can be accessed and
downloaded at high speed. Note that when connecting the mobile device to the
aircraft for the rst time, press and hold the power button of the aircraft to conrm.
When using Allow QuickTransfer in Sleep, you can only connect to an aircraft that
displays the Sleep icon.
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 65