How to Charge
Insert the batteries into the charging hub until there is a click. Connect the charging hub
to a power outlet using a charger. The battery with the highest power level will be charged
rst. The rest will be charged in sequence according to their power levels. The battery can
be stored in the charging hub after charging.
Remove the corresponding battery from the charging hub as shown.
Using Charging Hub as a Power Bank
1. Insert one or more batteries into the charging hub. Connect an external device via the
USB-C port, such as a mobile phone or remote controller.
2. Press the function button, and the status LED of the charging hub turns solid green.
The battery with the lowest power level will be discharged rst, followed by the
remaining batteries to be discharged sequentially. To stop charging the external
device, disconnect the external device from the charging hub.
DJI Air 3S User Manual
60 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
