dji AIR 3S - Page 89

The battery level LEDs will start blinking slowly after disconnecting from the aircraft. The
remote controller will beep and power o automatically after disconnecting from the
aircraft and with no operation for a long time.
• Avoid interference between the remote controller and other wireless
equipment. Make sure to turn o the Wi-Fi on nearby mobile devices. Land the
aircraft as soon as possible if there is interference.
• Release the control sticks or press the ight pause button if an unexpected
operation occurs.
GEO Awareness
GEO Awareness contains the features listed below.
UGZ (Unmanned Geographical Zone) Data update: You can update the FlySafe data by
using the data update feature automatically or storing the data in the aircraft manually.
• Method 1: Go to Settings in DJI Fly and tap About > FlySafe Data > Check for Updates
to update the FlySafe data automatically.
• Method 2: Check the website of your national aviation authority regularly and obtain
latest UGZ data to import to your aircraft. Go to Settings in DJI Fly, tap About > FlySafe
Data > Import from Files, and then follow the on-screen instructions to store and
import the UGZ data manually.
• A prompt will appear in the DJI Fly app when the import completes
successfully. If the import fails due to improper data format, follow the
on-screen prompt and retry.
• Before takeo, users must download the latest GEO Zone data from the
ocial aviation regulation website of the country or region where the
aircraft is being used. It is the responsibility of the user to make sure that the
GEO zone data is the latest version and that it is applied to every ight.
GEO Awareness Map Drawing: After the latest UGZ data is updated, a ight map with a
restricted zone will be displayed in the DJI Fly app. Name, eective time, height limit, etc.,
can be viewed by tapping the area.
GEO Awareness Pre-Warning: The app will prompt you with warning information when
the aircraft is near or in a restricted area to remind you to y with caution.
AGL (Above Ground Level) Statement
The vertical part of Geo-Awareness may use the AMSL altitude or the AGL height. The
choice between these two references is specied individually for each UGZ. Neither AMSL
altitude nor the AGL height is supported by DJI Air 3S. The height H appears in the DJI
DJI Air 3S User Manual
© 2024 DJI All Rights Reserved. 89