dji RONIN 4D - Firmware

68
©
2022 DJI All Rights Reserved.
Firmware
Update Ronin 4D rmware via the DJI Assistant 2 (Ronin Series).
How to update rmware:
1. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
2. Power on Ronin 4D and connect the USB-C port to the computer using a USB-C cable.
3. Click Ronin 4D and Update.
4. Select the rmware version.
5. DJI Assistant 2 (Ronin Series) will download and update the rmware automatically.
Do not disconnect from the internet while updating rmware. Otherwise, the update will fail.
Make sure the battery level of Ronin 4D is at least 40% before starting the update.
It is normal for Ronin 4D to restart while updating.