DLS FlexxPump 125 - 3.2 Nameplate and Designation; 3.3 Scope of Delivery

revision: 0
FlexxPump 125 (24V)
User Manual
12
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
3.2 Nameplate and designation
The nameplate of the FlexxPump 125 is visibly attached to the side of the pump itself.
There the CE mark and the serial number of the FlexxPump 125 are visible. Refer to
chapter 3, Fig. 1 for the location of the nameplate and serial number.
3.3 Scope of delivery
The FlexxPump 125 is available in several di󰀨erent versions. They di󰀨er in the number
of accessories supplied.
All versions of the FlexxPump 125 are prelled with a neutral, food-grade (H1) lubricant
(approx. 3 cm³), which can be mixed with the lubricants approved by DLS Schmiersys-
teme GmbH, to simplify the initial commissioning. The manufacturer's designation is
F02.
Further data and documentation on the lubricant F02 are available on request from
DLS Schmiersysteme GmbH.